If you are interested, please contact us!
How to eliminate the general problem when the headspace sampler encounters a fault? List the following points and hope to provide useful information to everyone.
The following steps are used as a general method of troubleshooting:
2. Check the HS status display and logs, especially the sequence log and event log. Check GC logs, events, and displays. If you are using a data system, also check the data system log. These logs also contain useful information that directly indicates the source of the problem.
3. Consider what has changed recently. See “What's changed?”.
4. Analyze whether the GC may cause this symptom.
5. Use the table of contents or search tool to find these symptoms in this manual. Review a list of possible causes of symptoms.
6. Check each possible cause or perform a test to narrow down the list of possible causes until the problem is resolved. When using the [Status] button to use this troubleshooting information, be sure to use the [Status] and [Info] buttons on the HS keyboard. Pressing these keys will display additional useful information related to the status of the HS and its components. If a problem occurs, a status message will be displayed. If the message indicates a hardware corruption, you can view more related information. Press [Status] to cycle through the status view for more detailed error messages.
When troubleshooting the Headspace Sampler, headspace vials manufacturer keep the following in mind: If the problem occurs suddenly, look at what has changed. Incidents are usually caused by discrete events such as maintenance, changes in gas sources, changes to other methods or analyses, and component failures. Resolving sudden changes can often involve changing consumables, calling the correct method, or replacing a faulty component.
This is the end of the introduction of General troubleshooting method for headspace sampler. I hope it can help you.
